Najnovejši izdelki
Kontaktiraj nas
- Četrto nadstropje, cona - A3, letalsko poslovno območje, Dongli distrikt, Tianjin, Kitajska.
- >prodajalec@coilwinding
MachinaCina.com - +8613072088960
Popolnoma avtomatski stroj za notranje navijanje s 4 postajami
3. Technical requirements for stator winding1.1. Workpiece descriptionA total of 1 product workpiece stator, respectively: outer diameter inner diameter stack height (not including the frame)1.120mm86mm28mm (The outer diameter is the same, but the stack height can be adjusted.)3.1.1 For winding requirements, please refer to Party A's drawings. The dimensions are designed with reference to the samples provided by Party A. (Party B is only responsible for the sample size. If it is involved in a situation that is inconsistent with the sample size, Party B will not bear the corresponding responsibility, but the height can be adjusted. ).3.1.2 The test after the equipment is wound meets the salt water pinhole test requirements of Party A (3 meters not more than 1 point), and the qualified rate of finished products is 100 percent within the allowable range of the parameters.
Opis
NAME:GW-IN200-4 Full automatic 4 station internal winding machine
SPECIFIKACIJA
Številka navijanja | 4 | Preštevanje toka | 0.5 obratov |
model | GW-IN200-4 | Linija accuary | 0.01 mm |
najvišja hitrost | 600 vrt./min | Kontrolna številka | 5-osni servo krmilnik Yaskawa |
Optimalni premer navitja | 0.05 mm–1,2 mm | Moč stroja | 11KW |
Natančnost linije | 0.01 mm | Delovni pritisk | 0,4–0,7Mpa |
Številka reže statorja | 2,3,4,6,8,9,12....... | Vhodna moč | AC380V 50/60Hz |
Ustrezen notranji premer statorja | Večji ali enak 10 mm | Teža stroja | 1000KGS |
Veljavni zunanji premer statorja | Manj ali enako 120 mm | Skupne dimenzije | 150012001950MM |
Nanesite višino sklada železnega jedra | Manj ali enako 100 mm |
Features :
1. The wire can be wound on any track by moving the wire mouth up and down and rotating the iron core. Therefore, by changing the computer winding program to correspond to different core stack thickness and different core pole number of winding. 2. Any abnormal operation, failure state to man-machine dialogue mode prompt operation, maintenance.
3. The number of winding loops can be set arbitrarily in the way of thread, and the specified 360 degrees can be stopped at any position, so that the wire passing is simple and convenient and the overall production efficiency is shortened.
4. When winding, the number of coils can be changed flexibly in each layer to realize different types of products.
5. Product programming is simple and convenient, with a unique special software, unlimited upload download storage. Easy to master with simple training.
6. Due to the high-performance control system and Servo Motor, it can ensure the stability of the position of the wire and shorten the time. Kill.
7.According to customer requirements can choose manual or automatic manipulator loading and unloading mode.
8. Vsaka enota je standardizirana, enostavna za zamenjavo in razstavljanje.
Priljubljena oznake: 4-postajni popolnoma avtomatski 4-postajalni stroj za notranje navijanje, Kitajska, dobavitelji, proizvajalci, tovarna, cena, izdelano na Kitajskem
Accessories Model
NE | NAME | MODEL | SPECIFIKACIJA | ZNAMKA |
1 | 400W Servo motor（2PCS） | 安川 | ||
2 | 3000W Servo motor（2PCS） | 安川 | ||
3 | 4000W Servo motor（1PCS） | 安川 | ||
4 | 400W Servo controller（2PCS） | 安川 | ||
5 | 3000W Servo controller（1PCS） | 安川 | ||
6 | 4000W Servo controller（2PCS） | 安川 | ||
7 | IO module（32IN 32OUT） | 安川 | ||
8 | M-3 Communication cable | 安川 | ||
9 | CPU module | 安川 | ||
10 | Base unit MBU304 (Single slot） | 安川 | ||
11 | Terminalna postaja | 安川 | ||
12 | IO Cable | 安川 | ||
13 | Komunikacijski vtič Servo CN1 | 安川 | ||
14 | Zaključni upor | 安川 | ||
15 | Zaslon na dotik | 10 inch | 威纶 | |
16 | Vmesni rele | 施耐德 | ||
17 | Podstavek releja | 施耐德 | ||
18 | 24V stikalno napajanje | 施耐德 | ||
19 | AC kontaktor | 施耐德 | ||
20 | C16 Odklopnik | 施耐德 | ||
21 | C60 Odklopnik | 施耐德 | ||
22 | Gumbi | 施耐德 | ||
23 | Element za obdelavo vira zraka | 亚德客 | ||
24 | Tlačno stikalo z elektronskim digitalnim zaslonom | 亚德客 | ||
25 | Indukcijsko stikalo | 亚德客 | ||
26 | Cilinder za škarje | Premer 32, hod 10 | 亚德客 | |
27 | Dvižni cilinder s škarjami | Premer 25, hod 20 | 亚德客 | |
28 | Cilinder za prenos igle | Premer 16, hod 100 | 亚德客 | |
29 | Cilinder kalupa | Premer 40, hod 15 | 亚德客 | |
30 | Elektromagnetni ventil | 3 links ,2 positions | 亚德客 | |
31 | Konektor | 2 povezovalni kos | 亚德客 | |
32 | Napenjalec | 亚博 | ||
33 | DC24V | 台邦 | ||
34 | Senzor izvora | 欧姆龙 | ||
35 | Mejno stikalo | 欧姆龙 | ||
36 | Stikalo za izbiro druge prestave | 施耐德 | ||
37 | Zelen normalno odprt gumb | 施耐德 | ||
38 | Rdeči normalno zaprt gumb | 施耐德 | ||
39 | Varnostna rešetka | DC24V | 德国劳恩 | |
40 | Vijak | 台湾上银 | ||
41 | Vodnik | 台湾上银 | ||
42 | transformator | 12KW | 中科 |
Morda vam bo všeč tudi
